生物活性牙科复合树脂的研究进展

牙科复合树脂由于色泽美观,在口腔临床上具有广泛的应用。但其仍然存在边缘缝隙的问题,从而导致继发龋的发生。再矿化复合树脂中的生物活性填料会释放能够再矿化的钙、磷离子,促使材料表面形成矿化层,能够抑制二次龋的发生。本文介绍了不同种类、含量、粒径大小和表面改性的生物活性填料对复合树脂物理、机械性能的影响,分析了再矿化复合树脂的再矿化行为,提出了再矿化复合树脂亟待解决的问题和研究难点,展望了复合树脂的研究方向。     

纳米银改性树脂基托机械性能的初步研究

采用磁控溅射技术在聚甲基丙烯酸甲酯(PMMA)树脂基托表面沉积一层纳米银(Ag NPs)涂层.研究了纳米银改性PMMA树脂基托的机械性能,为改性材料的临床应用提供理论基础.根据国际标准ISO2409:2007描述的划格法对涂层与基底的附着力强度进行测试,各组试件的接触角采用静态液滴法测量,三点弯曲法检测试件的弯曲强度.结果显示,各组涂层与PMMA基底材料结合良好,各组试件的表面润湿性变化不大,其中PMMA-Ag NPs80s组疏水性略有提高,各组试件的弯曲强度均符合国家标准.     

Growth and spectral properties of Yb:Ca0.28Ba0.72Nb2O6 disordered crystal

The growth, XRD patterns, spectral properties, and fluorescence decays of Yb:Ca_0.28Ba_0.72Nb₂O₆ (Yb:CBN) with doping concentration of 1 at.% and 5 at.% were studied. The peak absorption cross-section and the emission cross-section were calculated. Larger Stark splitting of Yb:CBN offers the prospect of the quasi-four level laser operation.     

Syntheses,characterization and nonlinear optical properties of sodium–scandium carbonate Na5Sc(CO3)4·2H2O

A novel nonlinear optical (NLO) material Na₅Sc(CO₃)₄·2H₂O has been synthesized under a subcritical hydrothermal condition. The structure is determined by single-crystal X-ray diffraction and further characterized by TG analyses and UV–vis–NIR diffuse reflectance spectrum. It crystallizes in the tetragonal space group P-421c, with a = b = 7.4622(6) Å, C = 11.5928(15) Å. The Second-harmonic generation (SHG) on polycrystalline samples was measured using the Kurtz and Perry technique, which indicated that Na₅Sc(CO₃)₄·2H₂O was a phase-matchable material, and its measured SHG coefficient was about 1.8 times as large as that of d₃₆ (KDP). The results from the UV–vis diffuse reflectance spectroscopy study of the powder samples indicated that the short-wavelength absorption edges of Na₅Sc(CO₃)₄·2H₂O is about 220 nm, suggesting that this crystal is a promising UV nonlinear optical (NLO) materials.     

Extending the Family of V4+ S=${{ 1/2 }}$ Kagome Antiferromagnets

The ionothermal synthesis, structure, and magnetic susceptibility of a novel inorganic–organic hybrid material, imidazolium vanadium(III,IV) oxyfluoride [C₃H₅N₂][V₉O₆F₂₄(H₂O)₂] (ImVOF) are presented. The structure consists of inorganic vanadium oxyfluoride slabs with kagome layers of V⁴⁺ S=${{ 1/2 }}$ ions separated by a mixed valence layer. These inorganic slabs are intercalated with imidazolium cations. Quinuclidinium (Q) and pyrazinium (Pyz) cations can also be incorporated into the hybrid structure type to give QVOF and PyzVOF analogues, respectively. The highly frustrated topology of the inorganic slabs, along with the quantum nature of the magnetism associated with V⁴⁺, means that these materials are excellent candidates to host exotic magnetic ground states, such as the highly sought quantum spin liquid. Magnetic susceptibility measurements of all samples suggest an absence of conventional long‐range magnetic order down to 2 K despite considerable antiferromagnetic exchange.     

Similar Structural Dynamics for the Degradation of CH3NH3PbI3 in Air and in Vacuum

We investigate the degradation path of MAPbI₃ (MA=methylammonium) films over flat TiO₂ substrates at room temperature by means of X‐ray diffraction, spectroscopic ellipsometry, X‐ray photoelectron spectroscopy, and high‐resolution transmission electron microscopy. The degradation dynamics is found to be similar in air and under vacuum conditions, which leads to the conclusion that the occurrence of intrinsic thermodynamic mechanisms is not necessarily linked to humidity. The process has an early stage, which drives the starting tetragonal lattice in the direction of a cubic atomic arrangement. This early stage is followed by a phase change towards PbI₂. We describe how this degradation product is structurally coupled with the original MAPbI₃ lattice through the orientation of its constituent PbI₆ octahedra. Our results suggest a slight octahedral rearrangement after volatilization of HI+CH₃NH₂ or MAI, with a relatively low energy cost. Our experiments also clarify why reducing the interfaces and internal defects in the perovskite lattice enhances the stability of the material.     

Anchoring Mechanism of ZnO Nanoparticles on Graphitic Carbon Nanofiber Surfaces through a Modified Co‐Precipitation Method to Improve Interfacial Contact and Photocatalytic Performance

A facile three‐step co‐precipitation method is developed to synthesize graphitic carbon nanofibers (CNFs) decorated with ZnO nanoparticles (NPs). By interchanging intermediate steps of the reaction processes, two kinds of nanohybrids are fabricated with stark morphological and physicochemical differences. The morphologies differ because of the different chemical environments of the NP/nanocluster formation. The hybrid with larger and non‐uniform ZnO nanocluster size is formed in liquid phase and resulted in considerable interfacial defects that deteriorate the charge‐transfer properties. The hybrid with smaller and uniform ZnO NPs was formed in a dry solid phase and produced near‐defect‐free interfaces, leading to efficient charge transfer for superior photocatalytic performance. The results broaden the understanding of the anchoring/bonding mechanism in ZnO/CNF hybrid formation and may facilitate further development of more effective exfoliation strategies for the preparation of high‐performance composites/hybrids.     

Synthesis and antifungal activity of chalcone derivatives

In the present study, using chalcone as a lead compound, a series of its derivatives (compounds 1–30) were designed and synthesised. Their activity of anti-pathogenic fungi of plants has been evaluated. It is found that these compounds have good antifungal activity against Sclerotinia sclerotiorum, Helminthosprium maydis, Botrytis cinerea, Rhizoctonia solani and Gibberella zeae. Among them, the inhibition of growth for compound 30 against S. sclerotiorum showed 89.9%, with the median effective concentrations (EC₅₀) of 15.4 μg mL^? 1. The inhibition of growth for compounds 28, 29 and 30 at a concentration of 100 μg mL^? 1 against H. maydis is 90.3%, 90.7% and 91.1%, with EC₅₀ of 15.1, 18.3 and 18.1μg mL^? 1, respectively.     

Screening anti‐tumor compounds from Ligusticum wallichii using cell membrane chromatography combined with high‐performance liquid chromatography and mass spectrometry

Tyrosine 367 Cysteine‐fibroblast growth factor receptor 4 cell membrane chromatography combined with high‐performance liquid chromatography and mass spectrometry was developed. Tyrosine 367 Cysteine‐HEK293 cells were used as the cell membrane stationary phase. The specificity and reproducibility of the cell membrane chromatography was evaluated using 1‐tert‐butyl‐3‐{2‐[4‐(diethylamino)butylamino]‐6‐(3,5‐dimethoxyphenyl)pyrido[2,3‐d]pyrimidin‐7‐yl}urea, nimodipine and dexamethasone acetate. Then, anti‐tumor components acting on Tyrosine 367 Cysteine‐fibroblast growth factor receptor 4 were screened and identified from extracts of Ligusticum wallichii. Components from the extract were retained on the cell membrane chromatographic column. The retained fraction was directly eluted into high‐performance liquid chromatography with mass spectrometry system for separation and identification. Finally, Levistolide A was identified as an active component from Ligusticum wallichii extracts. The 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyl‐tetrazolium bromide‐formazan colorimetric assay revealed that Levistolide A inhibits proliferation of overexpressing the mutated receptor cells with dose‐dependent manner. Phosphorylation of fibroblast growth factor receptor 4 was also decrease under Levistolide A treatment. Flex dock simulation verified that Levistolide A could bind with the tyrosine kinase domain of fibroblast growth factor receptor 4. Therefore, Levistolide A screened by the cell membrane chromatography combined with high‐performance liquid chromatography and mass spectrometry can arrest cell growth. In conclusion, the two‐dimensional high‐performance liquid chromatography method can screen and identify potential anti‐tumor ingredients that specifically act on the tyrosine kinase domain of the mutated fibroblast growth factor receptor 4.     

Optimizing gradient conditions in online comprehensive two‐dimensional reversed‐phase liquid chromatography by use of the linear solvent strength model

The linear solvent strength model was used to predict coverage in online comprehensive two‐dimensional reversed‐phase liquid chromatography. The prediction model uses a parallelogram to describe the separation space covered with peaks in a system with limited orthogonality. The corners of the parallelogram are assumed to behave like chromatographic peaks and the position of these pseudo‐compounds was predicted. A mix of 25 polycyclic aromatic compounds were used as a test. The precision of the prediction, span 0–25, was tested by varying input parameters, and was found to be acceptable with root mean square errors of 3. The accuracy of the prediction was assessed by comparing with the experimental coverages. Less than half of experimental coverages were outside prediction ± 1 × root mean square error and none outside prediction ± 2 × root mean square error. Accuracy was lower when retention factors were low, or when gradient conditions affected parameters not included in the model, e.g. second dimension gradient time affects the second dimension equilibration time. The concept shows promise as a tool for gradient optimization in online comprehensive two‐dimensional liquid chromatography, as it mitigates the tedious registration and modeling of all sample constituents, a circumstance that is particularly appealing when dealing with complex samples.